Two Conductors

Mercotac M 205

Model 205 Two Conductors, 4 Amps
High-speed model available (205-H) Low-torque/low-temp. models available (205-L) Available with stainless steel ball bearing (205-SS)

Mercotac model 205 is ideal for two-wire applications, such as thermocouples, strain gages, eddy current test devices, and wind turbine blade sensors, due to its compact size, quality signal connection, low torque and low cost.
Model 205 replaces the old model 590 for Leslie speakers and Hammond organs.


Model No.	Terminals	Voltage AC/DC	Amp Rating @240VAC	Max. Freq. MHz	Contact Resistance	Max. RPM	Temp Max. F (C) / Min. F (C)	Rotation Torque (gm-cm)	Circuit Separation

205

0-250

200

<1m

2000

140 (60) /45(7)

>25M

205-SS

0-250

200

<1m

2000

140 (60) /45(7)

>25M

205-L

0-250

200

<1m

1200

140 (60) /-20(-29)

>25M

205-LS

0-250

200

<1m

1200

140 (60) /-20(-29)

>25M

205-H

0-250

200

<1m

3600

140 (60) /45(7)

>25M

205-HS

0-250

200

<1m

3600

140 (60) /45(7)

>25M

"SS" designator indicates stainless steel ball bearing (recommended for wet or corrosive environments)
"L" designator indicates low torque / low temp.
"LS" designator indicates low temp. & stainless steel ball bearing
"H" designator indicates high RPM
"HS" designator indicates high RPM & stainless steel ball bearing

Model 205 Accessories

592
two contact receptacle
w/ 6" wires
(18 AWG)

591
two contact receptacle
w/ one 6" wire
(18 AWG)

594
two contact receptacle
w/ two solder holes
for 18 AWG wires

595
two contact cap
w/ two solder lugs

Receptacle used for mounting to rotating device.
Accessories are required for wire connections. Order Separately.

Model 205 Connections

Model 205 Suggested Mounting Methods

Model 205 is typically mounted by the knurled metal receptacle, which is press-fit into the rotating member of the machine. When mounting horizontally, mount the Mercotac so the body of the connector rotates.

Receptacle Mount Hole Dimensions
MODEL		HOLE DIAMETER (Ø) *	DEPTH
591, 592, 594		.283" (7.19)	.35" (8.89)
*Inch (mm) Tolerance Ø	+.001" (+.025)
	-.000" (-.000)

Installation Notes:

the up arrow should not point below horizontal
do not solder to or bend connector tabs
avoid lateral forces and mechanical loads (overly stiff or tight wires)
do not rigid mount both ends of connector
limit mounting eccentricity (runout / wobble) to .005" (.13mm)
provide overload protection within the circuit
avoid vibration and bumping motions

Rp 3.200.000
Rp 2.100.000Rp 2.100.000

BELI

Mercotac M 215-2k

Model 215-2K Two Conductors, 2@15amps & 2,000V
Disconnects included (4 lg.) Boot Kit available Available with stainless steel ball bearing (215-2KSS)

Mercotac model 215-2K series is ideal for high-voltage, two-wire applications such as ultrasonic welding.


Model No.	Terminals	Voltage AC/DC	Amp Rating @2000VAC	Max. Freq. MHz	Contact Resistance	Max. RPM	Temp Max. F (C) / Min. F (C)	Rotation Torque (gm-cm)	Circuit Separation

215-2K

0-2,000

100

<1m

1200

140 (60) /-20(-29)

400

>50M

215-2KSS

0-2,000

100

<1m

1200

140 (60) /-20(-29)

400

>50M

"SS" designator indicates stainless steel ball bearing (recommended for wet or corrosive environments)

Model 215-2K Accessories


57235 Boot Kit for dust or splash protection IP51	552KA Terminal 22 - 18 AWG (qty. 4 included)	55253 Shrink Tube (qty. 4 included)

Terminals for 16-14 AWG wires available (p/n 552KB).

Model 215-2K Standard Wire Connections

Model 215-2K Wire Connections With Optional Boot

Model 215-2K Suggested Mounting Methods

Model 215-2K is typically mounted by either the black body or the white plastic bushing on either end using a set screw. When mounting horizontally, mount the Mercotac so the body of the connector rotates.

Typical Body Mount Hole Dimensions
MODEL		HOLE DIAMETER (Ø) *	DEPTH
215-2K, et al		1.248" (31.7)	.80" (20.3)

Typical Bushing Mount Hole Dimensions
215-2K, et al		.748" (19.0)	.80" (20.3)
*Inch (mm) Tolerance Ø	+.001" (+.025)
	-.000" (-.000)

Installation Notes:

the up arrow should not point below horizontal
do not solder to or bend connector tabs
avoid lateral forces and mechanical loads (overly stiff or tight wires)
do not rigid mount both ends of connector
limit mounting eccentricity (runout / wobble) to .005" (.13mm)
provide overload protection within the circuit
avoid vibration and bumping motions

Mercotac M 230

Model 230 Two Conductors, 30 Amps

Disconnects included (4 lg.) Boot Kit available Available with stainless steel ball bearing (230-SS)


Model No.	Terminals	Voltage AC/DC	Amp Rating @240VAC	Max. Freq. MHz	Contact Resistance	Max. RPM	Temp Max. F (C) / Min. F (C)	Rotation Torque (gm-cm)	Circuit Separation

230

0-250

200

<1m

1800

140 (60) /-20(-29)

200

>25M

230-SS

0-250

200

<1m

1800

140 (60) /-20(-29)

200

>25M

"SS" designator indicates stainless steel ball bearing (recommended for wet or corrosive environments)

Model 230 Accessories


55251 Terminal 16 - 14 AWG (qty. 2 included)		57230 Boot Kit for dust / splash protection IP51

	55250 16 - 14 AWG (qty. 2 included)

Terminals for other wire gauges available. (22-18 AWG and 12-10 AWG)

Model 230 Standard Wire Connections

Model 230 Wire Connections With Optional Boot Kit

Model 230 Suggested Mounting Methods

Model 230 is typically mounted by the black body or the white plastic bushing on either end using a set screw. When mounting horizontally, mount the Mercotac so the body of the connector rotates.

Typical Body Mount Hole Dimensions
MODEL		HOLE DIAMETER (Ø) *	DEPTH
230 et al		.998" (25.35)	.80" (20)

Typical Bushing Mount Hole Dimensions
230 et al		.500" (12.70)	.40" (10)
*Inch (mm) Tolerance Ø	+.001" (+.025)
	-.000" (-.000)

Installation Notes:

the up arrow should not point below horizontal
do not solder to or bend connector tabs
avoid lateral forces and mechanical loads (overly stiff or tight wires)
do not rigid mount both ends of connector
limit mounting eccentricity (runout / wobble) to .005" (.13mm)
provide overload protection within the circuit
avoid vibration and bumping motions

PT.BANDAR ANEKA TEKNIK INDONESIA

The Centro Metrobroadway A-52 (3rd Floor)

Jl. Pantai Indah Utara II - Pantai Indah Kapuk

Jakarta Utara 14460

Mercotac M 235

Model 235 Two Conductors, 2@30amps & 500V
Disconnects included (4 lg.) Boot Kit available Available with stainless steel ball bearing (235-SS)


Model No.	Terminals	Voltage AC/DC	Amp Rating @500VAC	Max. Freq. MHz	Contact Resistance	Max. RPM	Temp Max. F (C) / Min. F (C)	Rotation Torque (gm-cm)	Circuit Separation

235

0-500

100

<1m

1200

140 (60) /-20(-29)

400

>50M

235-SS

0-500

100

<1m

1200

140 (60) /-20(-29)

400

>50M

"SS" designator indicates stainless steel ball bearing (recommended for wet or corrosive environments)

Model 235 Accessories


57235 Boot Kit for dust or splash protection IP51	55250 Terminal 16 - 14 AWG (qty. 2 included)	55251 Terminal 16 - 14 AWG (qty. 2 included)

Terminals for other wire gauges available. (22-18 AWG and 12-10 AWG)

Model 235 Standard Wire Connections

Model 235 Wire Connections With Optional Boot

Model 235 Suggested Mounting Methods

Model 235 is typically mounted by either the black body or the white plastic bushing on either end using a set screw. When mounting horizontally, mount the Mercotac so the body of the connector rotates.

Typical Body Mount Hole Dimensions
MODEL		HOLE DIAMETER (Ø) *	DEPTH
235, et al		1.248" (31.7)	.80" (20.3)

Typical Bushing Mount Hole Dimensions
235, et al		.748" (19.0)	.80" (20.3)
*Inch (mm) Tolerance Ø	+.001" (+.025)
	-.000" (-.000)

Installation Notes:

the up arrow should not point below horizontal
do not solder to or bend connector tabs
avoid lateral forces and mechanical loads (overly stiff or tight wires)
do not rigid mount both ends of connector
limit mounting eccentricity (runout / wobble) to .005" (.13mm)
provide overload protection within the circuit
avoid vibration and bumping motions

Mercotac M 110

MULTIFEEDER BTSR

SCHUNK PARALLEL GRIPPERS

Magnetic Sensors

Photoelectric Sensors

High Current SMT Power Inductor

Two Conductors

Mercotac M 205

Mercotac M 215-2k

Mercotac M 230

Mercotac M 235