PT. BANDAR ANEKA TEKNIK INDONESIA
MEKANIKAL, ELEKTRIKAL, INSTRUMENT, PNEUMATIC, HYDRAULIC, AUTOMATION, PLC, HMI, CONTROLS, MATERIAL HANDLING...
Categories
USD Calc
US$ x Rp. 13,500 =
Rp.  
Others
Others

MERCOTAC » Four Conductors

Urut berdasarkan

arrow product Mercotac M 4100

Mercotac M 4100
Model 4100
Four Conductors,
3@100amps & 1@60amps
500V

 


Wire connection clamps included 
Model No. Terminals Voltage
AC/DC
Amp
Rating
@500VAC
Max.
Freq.
MHz
Contact
Resistance
Max.
RPM
Temp
Max. F (C) /
 Min. F (C)
Rotation
Torque (gm-cm)
Circuit
Separation
4100 4 0-500 3@100,1@60 100

<1m

100 160(70) /-20(-29) 2500

>50M

Connector housing material is anodized aluminum

 Model 4100 Standard Wire Connections

 Model 4100 Accessories
41080
Grounding Collar w/ screw
(qty 2 included)
41081
Tab Clamp w/ screws
(qty 6 included)
 Model 4100 Suggested Mounting Methods
Model 4100 is typically mounted by the black anodized aluminum body using a set screw.  When mounting horizontally, mount the Mercotac so the body of the connector rotates. For vertical orientation with the rotating member above, mount to the model 4100 top (gray) plastic bushing.

Typical Body Mount Hole Dimensions

MODEL HOLE DIAMETER (Ø) * DEPTH
4100 2.365"    (60.07) 3.00"    (76.2)

Typical Vertical Top Bushing Mount Hole Dimensions

4100 2.365"    (60.07) 2.50"    (63.5)
*Inch (mm) Tolerance Ø    +.001" (+.025)
     -.000" (-.000)











Installation Notes:
  • the up arrow should not point below horizontal
  • do not solder to or bend connector tabs
  • avoid lateral forces and mechanical loads (overly stiff or tight wires)
  • do not rigid mount both ends of connector
  • limit mounting eccentricity (runout / wobble) to .005" (.13mm)
  • provide overload protection within the circuit
  • avoid vibration and bumping motions
detail

arrow product Mercotac M 430

Mercotac M 430

MERCOTAC 430

Rotary Connector mercotac 430

Four Conductors,

2@4amps, 2@30amps

detail

arrow product Mercotac M 435

Mercotac M 435
Model 435
Four Conductors,
4@30amps & 500V

 


Disconnects included 
(8 lg.) 
Boot Kit available 
Available with stainless steel ball bearing (435-SS) 
Model No. Terminals Voltage
AC/DC
Amp
Rating
@500VAC
Max.
Freq.
MHz
Contact
Resistance
Max.
RPM
Temp
Max. F (C) /
 Min. F (C)
Rotation
Torque (gm-cm)
Circuit
Separation
435 4 0-500 30 100

<1m

300 140 (60) /-20(-29) 850

>50M

435-SS 4 0-500 30 100

<1m

300 140 (60) /-20(-29) 850

>50M

"SS" designator indicates stainless steel ball bearing (recommended for wet or corrosive environments)

 Model 435 Accessories
55250
16 - 14 AWG (qty. 4 included)
55251
Terminal 16 - 14 AWG
(qty. 4 included)
57435
Boot Kit for dust or splash protection
IP51
Terminals for other wire gauges available.
(22-18 AWG and 12-10 AWG)
 Model 435 Standard Wire Connections

 Model 435 Wire Connections With Optional Boot Kit
 Model 435 Suggested Mounting Methods
Model 435 is typically mounted by either the black body or the white plastic bushing on either end using a set screw.  When mounting horizontally, mount the Mercotac so the body of the connector rotates.

Typical Body Mount Hole Dimensions

MODEL HOLE DIAMETER (Ø) * DEPTH
435, et al 1.772"    (45.00) .80"    (20)

Typical Bushing Mount Hole Dimensions

435, et al 1.250"    (31.75) .80"    (20)
*Inch (mm) Tolerance Ø    +.001" (+.025)
     -.000" (-.000)











Installation Notes:
  • the up arrow should not point below horizontal
  • do not solder to or bend connector tabs
  • avoid lateral forces and mechanical loads (overly stiff or tight wires)
  • do not rigid mount both ends of connector
  • limit mounting eccentricity (runout / wobble) to .005" (.13mm)
  • provide overload protection within the circuit
  • avoid vibration and bumping motions
detail
Login
Search
Search:
Information
Product Scroller
© 2019 www.bandarteknik.com
PT. BANDAR ANEKA TEKNIK INDONESIA
THE CENTRO METROBROADWAY BLOK A NO 52
JL PANTAI INDAH UTARA II - PANTAI INDAH KAPUK
JAKARTA UTARA 14460 - INDONESIA

Toko Online