Selamat datang di website PT.Bandar Aneka Teknik Indonesia. Kami menyediakan berbagai peranti Mechanical, Electrical, Instrument, Hydraulic, Pneumatic dan Automation

Mercotac » Two Conductors

#2 of 4 | prev product Prev - Next next product

product arrow Mercotac M 215-2k

Mercotac M 215-2k
 
 
Model
215-2K

Two Conductors,
2@15amps & 2,000V

 


Disconnects included (4 lg.)
Boot Kit available
Available with stainless steel
  ball bearing (215-2KSS)
 
Mercotac model 215-2K series is ideal for high-voltage, two-wire applications such as ultrasonic welding.
Model No. Terminals Voltage
AC/DC
Amp
Rating
@2000VAC
Max.
Freq.
MHz
Contact
Resistance
Max.
RPM
Temp
Max. F (C) /
 Min. F (C)
Rotation
Torque (gm-cm)
Circuit
Separation
215-2K 2 0-2,000 15 100

<1m

1200 140 (60) /-20(-29) 400

>50M

215-2KSS 2 0-2,000 15 100

<1m

1200 140 (60) /-20(-29) 400

>50M

"SS" designator indicates stainless steel ball bearing (recommended for wet or corrosive environments)

 Model 215-2K Accessories
57235
Boot Kit for dust or splash 
protection IP51
552KA
Terminal 22 - 18 AWG
(qty. 4 included)
55253
Shrink Tube
(qty. 4 included)
 
Terminals for 16-14 AWG wires available (p/n 552KB).
 Model 215-2K Standard Wire Connections

 Model 215-2K Wire Connections With Optional Boot
  Model 215-2K Suggested Mounting Methods
Model 215-2K is typically mounted by either the black body or the white plastic bushing on either end using a set screw.  When mounting horizontally, mount the Mercotac so the body of the connector rotates.

Typical Body Mount Hole Dimensions

MODEL HOLE DIAMETER (Ø) * DEPTH
215-2K, et al 1.248"    (31.7) .80"    (20.3)

Typical Bushing Mount Hole Dimensions

215-2K, et al .748"    (19.0) .80"    (20.3)
*Inch  (mm) Tolerance Ø   +.001" (+.025)
    -.000" (-.000)











Installation Notes:
  • the up arrow should not point below horizontal
  • do not solder to or bend connector tabs
  • avoid lateral forces and mechanical loads (overly stiff or tight wires)
  • do not rigid mount both ends of connector
  • limit mounting eccentricity (runout / wobble) to .005" (.13mm)
  • provide overload protection within the circuit
  • avoid vibration and bumping motions