1. AS1
AS1 Crossed beams Area sensor 4 scanning modes Heights 100mm (6/16 beams) to 300mm (48 beams) Min. object dimension Ø6mm or flat 0.2x75mm Standard distance 2 m and Long distance up to 4 m Version with trimmer adjustment for emission power PNP out on when one or more beams are interrupted. Area sensors based on light array technology are available in AS1 line for object detection purposes in a very wide range of applications with 100, 150 and 300 mm controlled height
2.CX0
The CX0 series microcontrollers are equipped with a supply voltage of 16.8 ... 30 VDC. Two digital outputs PNP or NPN are available as the output function. The CX0 series offers a range of 6 meters with an aluminum housing with an IP67 degree of protection. The electrical connection is via an M12 connector. Due to the very high degree of protection, the optical series can be used for almost all relevant applications.
3.CX1
The CX1 series microcontrollers are equipped with a supply voltage of 16.8 ... 30 VDC. PNP or NPN outputs are available as output functions. The CX1 series offers a range of 6 meters with an aluminum housing with an IP67 degree of protection. The electrical connection is via an M12 connector. Due to the very high degree of protection, the optical series can be used for almost all relevant applications.
4.CR0
The CR0 series microcontrollers are equipped with a supply voltage of 16 ... 30 VDC. IO-Link, NPN- PNP, NO + NC or push-pull are available as the output function. The CR0 series offers a range of 4.5 meters with an aluminum housing with an IP67 degree of protection. The electrical connection is via an M12 connector. Due to the very high degree of protection, the optical series can be used for almost all relevant applications.
1. Luminescence-sensors
The LD46 luminescence sensors emit ultraviolet light and detect only visible light converted and reflected from fluorescent objects or marks, independent from the background color and surface. The LD46 sensors can reach a 100mm operating distance and a 2kHz switching frequency, thanks to the UV high-power emission using 6 LEDs. The high power and definition of the LD46 sensor light spot enable the detection of critical targets with a very poor or non-homogeneous or discontinued luminescent level, as for example on raw wood, corrugated carton, fabric, ceramic tiles.
2.TL46
The TL46 contrast sensorseries is characterized by excellent performances in terms of resolution due to a RGB LEDs emission, low response time and high switching speed. The sensor, developed in a sturdy metal housing with standard fixing, is available in 3 different version. TL46-W basic version with 2 set push-buttons and 2 LEDs indicator, TL46-WL standard version has set 3 push-buttons, 4 LEDs indicator and bar graph is also available for manual setting of the threshold and TL46-WLF enhanced version presents a 4-digit display for the setting of the most advanced functions, such as dynamic acquisition of the contrast mark. The sensor reaches the maximum market performances at 30kHz switching frequency.
3.TLµ
The TLµ contrast sensor series offers solutions for all detection applications of register marks and other neutral or colored references. The microprocessor-based setting can be either 'Teach-in' using two push-buttons or 'Remote' by cable. The LED emission can be red/green with automatic selection, or white offering the possibility of operating on all contrasts. Models with interchangeable 9mm or 18mm lenses are available. Whereas 22, 28 and 50mm lenses are supplied as accessories. Many different fiber optic models are available. The output is NPN or PNP according to the model, but can always be selected using an internal switch. An analog output proportional to the received light is also present.
4.TL50
The series of TL50 contrast sensors provides the best solution for applications where a cost reduction is required, without refusing excellent detection performances. The optimized optics of these sensors, the RGB LED transmitter with automatic choice of colour and high resolution, enable the detection of minimal colour contrasts in grey scale between print mark and background, or different objects or surfaces. The high resolution does not lead to restrictions of the detection rate - the response time here 33 ms and the switching frequency is 15 kHz.
There are 8 cubic sensors type of DataSensors product :
S300 , S6 , S60 , S62 , S90 , Q50 , BS/BV , RX
FOR INQUIRY PLEASE CONTACT OUR EMAIL OR WHATSAPP
There are 8 cubic sensors type of DataSensors product :
S65-M , S85 , S81 , EDS-C30 , S67 , DLS-C , FLS-C , S80
FOR INQUIRY PLEASE CONTACT OUR EMAIL OR WHATSAPP
The temperature controllers of the ELK 22 S series offer a high degree of flexibility due to their flexibly applicable build-up current.
Thanks to the detachable front unit, this regulator is not only mounted in the standard 48x48mm recess, but is also mountable in 22mm diameter holes through the M22 neck.
1.S7
S7 high resolution amplifiers are suggested for the detection of small objects, through fibre optic cable, in confined space, in presence of high temperature, with the sensor mounted in cabinet or far from object to detect.
2.S70
S70 fiber optic sensors with double display and double and analog outputs are the upgrading solution for the high resolution and high speed detection of very small objects mounted in reduced space.
FOR INQUIRY PLEASE CONTACT OUR EMAIL OR WHATSAPP
There are 7 fork sensors type of DataSensors product :
SR21 , SR23 , SR31 , SRF , FC6 , FC7 , FC5
FOR INQUIRY PLEASE CONTACT OUR EMAIL OR WHATSAPP
ORST 020 PSK-ST3 / ORST 040 PSK-ST3
FOR INQUIRY PLEASE CONTACT OUR EMAIL OR WHATSAPP
There are 6 type Inductive Proximity of DataSensors
Ø6,5 Housing | M8 Housing | M12 Housing | M18 Housing | M30 Housing | Cubic Housing
FOR INQUIRY PLEASE CONTACT OUR EMAIL OR WHATSAPP
9 type of DataSensors Miniature Sensors : S3Z , S3 , S8 , SM-all , S45 , S100 , SM123 , QM , QX.
FOR INQUIRY PLEASE CONTACT OUR EMAIL OR WHATSAPP
The temperature controllers of the THQ series are distinguished by a high-precision control behavior and are therefore particularly suitable for use in heat sealing and thermoforming processes of the automatic packaging processes. The initial autotuning AT and the permanent adaptive function ADT can be activated for the PID control, and thus the control times can be optimized in the case of frequent or rapid temperature jumps such as the start and stop of a process. Using the keypad and the simple or duplicated display, all the values and configurations of the controller, such as the sensor input, the control mode and the alarm functions, can be set, with the possibility of blocking the programming via three different safety levels. The exclusive LFA diagnostic function can detect faults in the entire control loop, e.g. A short circuit of the thermocouples or the defect of the resistors.
M18 HOUSING : UK1 , UK6
M30 HOUSING : UT , US30
M50 HOUSING : US50
QUBIC HOUSING
ULTRASONIC FORK SENSOR : FC8 , SRX3 , SFT-10-3
FOR INQUIRY PLEASE CONTACT OUR EMAIL OR WHATSAPP